Conference Proceedings, Papers & Presentations

H-S. Shim, X. Li, M Denison, E.G. Eddings and I. Preciado, “Rotary Kiln Approach to Produce Biochar from Invasive Scrub Species for Soil Remediation and Carbon Sequestration,” presentation at 47th International Technical Conference on Clean Energy, Tampa, FL, July 23-27, 2023.

H-S. Shim, X. Li, M Denison, E.G. Eddings and I. Preciado, “Development of Rotary Kiln-Based Conversion Technology for Hydrogen-Enriched Syngas Production from Coal Waste and Biomass,” presentation at 47th International Technical Conference on Clean Energy, Tampa, FL, July 23-27, 2023.

J. Moon, Z. Karimi, A. Prlina, C. Van Ginkel, E.G. Eddings, R. Warren, “Flash Pyrolyzed Coal Char for Sodium Ion Battery Anodes,” 243rd Electrochemical Society (ECS) Meeting, May 28-June 2, 2023, Boston, MA.

W. Wang, M. Cooley, K. Jolley, R.M. Kirby and E.G. Eddings, “Predicting the performance of mesophase formation and properties of mesophase pitch based on experimental investigation and machine learning,” presentation at 2022 AIChE Annual meeting, Phoenix, AZ, Nov. 13-18, 2022.

W. Wang, K. Jolley, M. Nelson and E.G. Eddings, “Solvolysis liquefaction of low-rank coals and polyolefin waste-plastics-derived liquid to manufacture mesophase pitch intermediates of value-added high-performance carbon materials,” presentation at 2022 AIChE Annual meeting, Phoenix, AZ, Nov. 13-18, 2022.

A. Prlina, E.G. Eddings and R. Breault, “Multiphysics Simulation of Supercritical CO2 Gasification for Hydrogen Production,” presentation at 46th International Technical Conference on Clean Energy, Tampa, FL, Aug. 1-4, 2022.

J.O.L. Wendt and E.G. Eddings, “Three Decades of Joint REI/University of Utah Combustion Research,” presentation at 46th International Technical Conference on Clean Energy, Tampa, FL, Aug. 1-4, 2022.

A. Butterfield, T. Tran, I. Preciado, G. Silcox and E.G. Eddings, “Products from Pandemic Labs: Custom At-Home & Benchtop Unit Operations Teaching Modules,” presentation at 2021 AIChE Annual meeting, Boston, MA, Nov. 7-11, 2021.

J. Malzahn, I. Preciado and E.G. Eddings, “Utilizing Pyrolysis Secondary Gas-Phase Reactions to Produce Anisotropic Carbons from Non-Graphitizing Feedstocks,” presentation at 2021 AIChE Annual meeting, Boston, MA, Nov. 7-11, 2021.

J. Malzahn, S. Fang, S. Sane, S. Zhe, R.M. Kirby and E.G. Eddings, “Effect of Pyrolysis Conditions on Producing Mesophase Pitch from Varying Ranks of Coal and Correlating Their Product Properties with Machine Learning Models,” presentation at 2021 AIChE Annual meeting, Boston, MA, Nov. 7-11, 2021.

W. Wang, I. Preciado and E.G. Eddings, “Thermochemical Co-conversion of Waste Polyolefins with Low-rank Aromatic-rich Hydrocarbons into an Intermediate of High-Quality Anisotropic Pitch,” presentation at 2021 AIChE Annual meeting, Boston, MA, Nov. 7-11, 2021.

W. Wang, J. Malzahn, I. Preciado and E.G. Eddings, “Mild Solvolysis Liquefaction of Low-Rank Coal into a Feedstock of Value-Added Carbon Material Precursors,” presentation at 2021 AIChE Annual meeting, Boston, MA, Nov. 7-11, 2021.

T. Allguren, R. Edland, K. Andersson, A. Fry, E.G. Eddings, and F. Normann, “NO formation during co-combustion of coal with two thermally treated biomasses,” presentation at the 45th International Technical Conference on Clean Energy, Clearwater, FL, July 26-29, 2021.

E.G. Eddings, A. Fry and K. Andersson, “Overview of a Comprehensive Program to Assess the Impact of Co- firing Biomass with Coal in a 480 MW Power Plant,” presentation at the 45th International Technical Conference on Clean Energy, Clearwater, FL, July 26-29, 2021.

T. Draper, A. Prlina, T. Ring and E.G. Eddings, “A Comparison of Industrial-Scale (480 MWe) Radiometer Heat Flux Measurements Between Pulverized- Coal and 85% Coal/15% Biomass Co- firing Combustion,” presentation at the 45th International Technical Conference on Clean Energy, Clearwater, FL, July 26-29, 2021.

A. Prlina, E.G. Eddings and R. Breault, “Multiphysics Simulation of Supercritical CO2 Gasification,” presentation at the 45th International Technical Conference on Clean Energy, Clearwater, FL, July 26-29, 2021.

Z. Karimi, J. Moon, C. Van Ginkel, J. Malzahn, E.G. Eddings, R. Warren, “Bituminous Coal Char-Derived Hard Carbon As a Low-Cost Anode Material for Sodium-Ion Batteries,” 239th Electrochemical Society (ECS) Meeting, May 30-June 3 2021, Digital Meeting. ECS Meeting Abstracts, 111 (2021).

Z. Karimi, J. Moon, C. Van Ginkel, J. Malzahn, E.G. Eddings, R. Warren, “Effect of Electrolyte Composition on the Performance of Coal Char-Derived Carbon Supercapacitors,” 239th Electrochemical Society (ECS) Meeting, May 30-June 3 2021, Digital Meeting. ECS Meeting Abstracts, 267 (2021).

J. Malzahn, I. Preciado, D. Wang, M. Weisenberger and E.G. Eddings, “Production of Mesophase Pitch from Coal for Carbon Fiber Production,” presentation at the 44th International Technical Conference on Clean Energy, Clearwater, FL, June 16-20, 2019.

T. Allguren, R. Edland, K. Andersson, A. Fry, E.G. Eddings and F. Normann, “NO formation during co-combustion of coal with two thermally treated biomasses,” presentation at the 44th International Technical Conference on Clean Energy, Clearwater, FL, June 16-20, 2019.

R. Edland, T. Allguren, K. Andersson, A. Fry, F. Normann, E.G. Eddings and J. Wendt, “On the nitrogen chemistry in jet and swirled pilot-scale PF flames,” presentation at the 44th International Technical Conference on Clean Energy, Clearwater, FL, June 16-20, 2019.

C. Jaramillo and E.G. Eddings, “Moisture Uptake and Mechanical Stability of Upgraded Biomass for Use in Pulverized Coal Co-firing,” presentation at the 44th International Technical Conference on Clean Energy, Clearwater, FL, June 16-20, 2019.

T. Draper, K. Scheib, S. Harding, M. Hradisky, J. Spinti, T. Ring, A. Fry, M. Backman, A. Gunnarson, K. Andersson and E.G. Eddings, “A comparison of heat transfer measurements between pulverized-coal and 85% coal/15% biomass co-firing combustion in a 1.5 MW pilot-scale furnace,” presentation at the 44th International Technical Conference on Clean Energy, Clearwater, FL, June 16-20, 2019.

A. Fry, S. Fakourian, K. Andersson, T. Allguren, A. Gunnarson, J. Wendt, Y. Wang, X. Li, M. Backman and E.G. Eddings, “Comparison of Combustion Performance and Fouling Behavior While Firing a 15 wt% Blend of Prepared Woody Biomass with Coal and Pure Coal in a 1.5 MW Pilot-scale Furnace,” presentation at the 44th International Technical Conference on Clean Energy, Clearwater, FL, June 16-20, 2019.

T. Draper, J. Brindle, T. Ring and E.G. Eddings, “Progress in a Model to Predict the Complex Refractive Indices of Natural Coal Ash at High Temperature,” presentation at the 43rd International Technical Conference on Clean Energy, Clearwater, FL, June 3-7, 2018.

A. Fry, S. Fakourian, T. Jasperson and E.G. Eddings, “Elucidating the Behavior of a Blend of Prepared Woody Biomass and Utah Bituminous Coal in a Raymond Bowl Mill,” presentation at the 43rd International Technical Conference on Clean Energy, Clearwater, FL, June 3-7, 2018.

A. Fry, Z. Dobo, E.G. Eddings, K. Andersson and K. Clark, “Demonstration of the Co-firing of Modified Biomass with Pulverized Coal at the Hunter Plant,” presentation at the 43rd International Technical Conference on Clean Energy, Clearwater, FL, June 3-7, 2018.

A. Owen, D. Eaton, R. Andrews, E.G. Eddings and M. Weisenberger, “Coal to Carbon Fiber,” presentation at the 2018 Coal Prep Technology Conference and Exhibition, 23-25 April 2018, Lexington KY.

E.G. Eddings, “Conventional and Unconventional Methods for Coal Extraction and Processing,” presentation at the DOE/NETL Workshop on Research Needs to Enable the Use of Coal as a Precursor for Value-Added Products, Pittsburgh, PA, April 5, 2018.

K. Andersson, F. Normann, E.G. Eddings and A. Fry, “On the Sulphur Chemistry in Low-Recycle and Pressurized Oxy-Combustion Systems,” presentation at the 42nd International Technical Conference on Clean Energy, Clearwater, FL, June 11-15, 2017.

A. Fry, S. Fakourian, E.G. Eddings, Z. Dobo and K. Clark, “Milling of Utah, Sufco Coal with 15% Prepared Manti – La Sal Woody Biomass in a Raymond Bowl Mill,” presentation at the 42nd International Technical Conference on Clean Energy, Clearwater, FL, June 11-15, 2017.

D. Wang, S.K. Mohanty and E.G. Eddings, “Developments in the Production of High-value Products from Coal,” presentation at the 42nd International Technical Conference on Clean Energy, Clearwater, FL, June 11-15, 2017.

T. Draper, J. Gorewoda, L. Kolczynski, A. Fry, V. Scherer, Terry Ring and E.G. Eddings, “The influence of temperature on the spectral emittance of ash deposits taken from a 1.5 MW, oxy-fired pulverized coal test facility,” presentation at the 42nd International Technical Conference on Clean Energy, Clearwater, FL, June 11-15, 2017.

D. Wang, S.K. Mohanty and E.G. Eddings, “Production of Hydrogen through Photo-electro-catalytic Oxidation of Coal using TiO2 Nanotube Arrays,” presentation at the 231st Electrochemical Society Meeting, New Orleans, May 28-June 1, 2017.

A. Fry, J. Spinti, I. Preciado, O. Diaz and E.G. Eddings, “Pilot-Scale Investigation and Modeling of Heat Flux and Radiation from an Oxy-coal Flame,” presentation at the 41st International Technical Conference on Clean Coal & Fuel Systems, Clearwater, FL, June 5-9, 2016.

 

L. Kolczynski, A. Fry, T. Draper, T. Ring and E.G. Eddings, “Density, Porosity, and Heat Capacity Characteristics of Ash Deposits from a 1.5 MW Coal Furnace,” presentation at the 41st International Technical Conference on Clean Coal & Fuel Systems, Clearwater, FL, June 5-9, 2016.

 

T. Draper, A. Fry, L. Kolczynski, T. Ring and E.G. Eddings, “Thermal Characterization of a 1.5 MW Pulverized-coal Reactor using Infrared Heat Flux and Measured Heat Loss,” presentation at the 41st International Technical Conference on Clean Coal & Fuel Systems, Clearwater, FL, June 5-9, 2016.

 

O. Diaz, J. Spinti, A. Fry, B. Schroeder, J. Thornock, B. Isaac, D. Harris, M. Hradisky, S. Smith, E.G. Eddings and P.J. Smith, “A Validation/Uncertainty Quantification Analysis of a 1.5 MW Oxy-Coal Fired Furnace,” presentation at the Western States Section of the Combustion Institute 2016 Spring Meeting, Seattle, WA, March 21-22, 2016.

 

A. Fry, J. Spinti, I. Preciado, O. Diaz and E.G. Eddings, “Heat Flux, Radiation and CO Distributions from a 1.5 MW Oxy-Coal Flame,” presentation at the 2015 AIChE Annual Meeting, Salt Lake City, UT, November 9-13, 2015.

 

J. Caldwell, R. Coates and E.G. Eddings, “Field-Deployable Mobile Biomass Pyrolysis Technology,” presentation at the 2015 AIChE Annual Meeting, Salt Lake City, UT, November 9-13, 2015.

D. Wang, K. Kelly and E. Eddings, “Liquid and Gaseous Hydrocarbons from Underground Coal Thermal Treatment,” presentation at the 2015 AIChE Annual Meeting, Salt Lake City, UT, November 9-13, 2015.

T. Draper, E. Eddings and T. Ring, “Thermal Characterization of Ash Deposits in a 1.5 MW Reactor,” presentation at the 2015 AIChE Annual Meeting, Salt Lake City, UT, November 9-13, 2015.

M. Lemieux, S. Mohanty and E. Eddings, “Value-Added Products From Thermal Treatment of Biomass Pyrolysis Oil,” presentation at the 2015 AIChE Annual Meeting, Salt Lake City, UT, November 9-13, 2015.

F. Babazadeh, G. Silcox, L. Switzer and E. Eddings, “Cold Flow Study of a Segregated Zoning Burner,” presentation at the 2015 AIChE Annual Meeting, Salt Lake City, UT, November 9-13, 2015.

A. Fry, J. Spinti, I. Preciado, O. Diaz and E.G. Eddings, “Predicting Heat Transfer Characteristics of a 1.5 MWth Oxy-Coal Flame,” paper at 5th Meeting of the IEAGHG International Oxyfuel Combustion Research Network Meeting, Wuhan, China, October 27-30, 2015.

O. Diaz-Ibarra, J. Spinti, A. Fry, B. Schroeder, J. Thornock, B. Issac, D. Harris, M. Hradisky, S. Smith, E. Eddings, P. Smith “A Validation/Uncertainty Quantification Analysis of a 1.5 MW Oxy-Coal Fired Furnace,” paper at the American Flame Research Committee (AFRC) 2015 Industrial Combustion Symposium, Salt Lake City, UT, September 9-11, 2015.

A. Fry, J. Spinti, I. Preciado, O. Diaz and E.G. Eddings, “Pilot-scale Investigation of Heat Flux and Radiation from an Oxy-coal Flame,” paper at the American Flame Research Committee (AFRC) 2015 Industrial Combustion Symposium, Salt Lake City, UT, September 9-11, 2015.

F. Babazadeh, G. Silcox, L. Switzer and E. Eddings, “Development of a Sub-Surface Burner Technology for In-Situ Heating,” paper at the American Flame Research Committee (AFRC) 2015 Industrial Combustion Symposium, Salt Lake City, UT, September 9-11, 2015.

L. Urán, L. Carvajal, L. Gaviria, D. Wang, E. Eddings and A. Molina, “A reaction mechanism for the formation of coke from thermal cracking of a heavy Colombian crude oil at in situ combustion (ISC) conditions,” presentation at Petroleum and Gas 2015 – International Petroleum Conference & Exhibition, Bogota, Colombia, August 24-25, 2015.

A. Fry, J. Spinti, O. Diaz, I. Preciado and E. Eddings, “Predicting Heat Transfer Characteristics of a 1.5 MWth oxy-coal Flame,” paper at The 40th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, Florida, May 31 – June 4, 2015.

T. Draper, P. Toth, T. Ring and E. Eddings, “Optical heat flux and temperature measurements on a 100 kW oxy-fuel combustor,” paper at the 7th European Combustion Meeting (ECM 2015), Budapest, Hungary, March 30 – April 2, 2015.

P. Toth, A. Marton, T. Draper, A. Palotas and E. Eddings, “The behavior of secondary pyrolysis products in oxy-coal flames,” paper at the 7th European Combustion Meeting (ECM 2015), Budapest, Hungary, March 30 – April 2, 2015.

L. Urán, L. Carvajal, L. Gaviria, D. Wang, E. Eddings and A. Molina, “Coke formation during pyrolysis of a Colombian heavy crude oil under in situ combustion conditions,” presentation at the 2014 AIChE Annual Meeting, Atlanta, GA, November 16-21, 2014.

E.G. Eddings, R. Okerlund, R.L. Coates and S. Bell “Combustion Behavior of Raw, Torrefied and Pyrolyzed Biomass when Co-fired with Pulverized Coal,” 20th International Conference on Impacts of Fuel Quality on Power Production, October 26-31, 2014 in Snowbird, Utah.

E.G. Eddings, R.L Coates, T. Gardner and D. McAvoy “Scaling and Demonstration of a Mobile Process for Biomass Pyrolysis,” Symposium on Thermal and Catalytic Sciences for Biofuels and Biobased Products, Denver, Colorado, Sept. 2-5, 2014.

K.E. Kelly, D. Wang, O. Diaz, E.G. Eddings, and D.W. Pershing “Comprehensive Greenhouse Gas Evaluation of Underground Coal Thermal Treatment for Production of Syngas and Liquid Fuels,” paper at The 39th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, Florida, June 1-5, 2014.

E.G. Eddings, T. Gardner and R. Coates “Mobile Pyrolysis Process for Conversion of Biomass into Energy Products,” presentation at the 2013 North American Biochar Symposium, October 13-16, 2013.

P. Toth, T.A. Ring, A.B. Palotas and E.G. Eddings “Application of optical diagnostic techniques to oxy-coal flames,” presentation at the 3rd IEAGHG Oxyfuel Combustion Conference, Ponferrada, Spain, Sept. 9-13, 2013.

P. Toth, A.B. Palotas, T.A. Ring, and E.G. Eddings “A robust method for the quantitative imaging of dense reacting particulate flows,” paper at the 8th National Combustion Meeting, Park City, UT, May 19-22, 2013.

P. Toth, A.B. Palotas, T.A. Ring, E.G. Eddings, R. Vander Wal, C.K. Gaddam, J. Levinthal, I.C. Jaramillo and J.S. Lighty, “Detailed investigation of soot nanostructure: Effect of pressure,” paper at the 8th National Combustion Meeting, Park City, UT, May 19-22, 2013.

D. Rezaei, E.G. Eddings, K.E. Kelly and J.O.L. Wendt “Near-field aerodynamic effects of pure O2 injection in co-axial oxy-coal turbulent diffusion flames,” paper at the 8th National Combustion Meeting, Park City, UT, May 19-22, 2013.

E.G. Eddings, “Potential Uses for Woody Biomass Resources,” presentation at 2013 Governor’s Energy Development Summit, Salt Lake City, UT, January 10-11, 2013.

E.G. Eddings A. Vance, R. Okerlund, and R. Coates, “Overview of a Co-firing Study of Pulverized Coal with Pinion Pine/Juniper Wood,” presentation at 3rd Annual Southern Utah Biomass Summit, Beaver, UT, September 18-20, 2012.

E.G. Eddings A. Vance, R. Okerlund, and R. Coates, “Co-firing Pulverized Coal with Pinion Pine/Juniper Wood in Raw, Torrefied and Pyrolyzed Forms,” presentation at American Flame Research Committee Fall Meeting, Salt Lake City, UT, September 5-7, 2012.

A. Fry, B. Adams, E. Eddings and T. Fout, “Carbon, Sulfur and Nitrogen Behavior During Pilot-Scale Testing of Oxy-coal Combustion,” Power Plant Air Pollutant Control “MEGA” Symposium, Baltimore, MD, August 20-23, 2012.

P. Toth, A.B. Palotas, J.S. Lighty and E.G. Eddings. “A Novel Framework for the Quantitative Analysis of High Resolution Transmission Electronmicrographs of Soot”. International Sooting Flames Workshop, Warsaw, Poland, July 28-29, 2012.

E.G. Eddings A. Vance, R. Okerlund, D. Hanks, R. Coates and S. Bell, “Comparison of Pinion Pine/Juniper Wood Co-Firing in Raw, Torrefied and Pyrolyzed Forms,” presentation at The 37th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, Florida, June 3-7, 2012.

K. Gneshin, W. Ding, R. Krumm and E.G. Eddings, “Hydrocarbon Evolution and Porosity Development in Bituminous Coal Under Conditions that Simulate Underground Coal Pyrolysis,” paper presented at The 37th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, Florida, June 3-7, 2012.

E.G. Eddings W. Ding and K. Gneshin, “Underground Coal Thermal Treatment for the Production of Liquid and Gaseous Fuels from Coal,” presentation at The 37th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, Florida, June 3-7, 2012.

A. Sánchez, E.G. Eddings and F. Mondragón. “Efecto del O2 y CO2 en las emisiones durante oxi-combustión en fase gaseosa”. IX Congreso Nacional y IV Internacional de Ciencia y Tecnología del Carbón y Combustibles Alternativos”. Cali, Colombia. November 2011.

T.A. Ring, H. el-Gendy and E.G. Eddings, “Oxy-Coal Combustion Flamelet Dynamics From High-Speed Video Analysis,” presentation at the 2011 AIChE Annual Meeting, Minneapolis, MN, Oct. 16-21, 2011.

L. Wang and E.G. Eddings, “Application of a Multi-Grain Model: Single Large Coal Particle Oxy-Combustion,” presentation at the 2011 AIChE Annual Meeting, Minneapolis, MN, Oct. 16-21, 2011.

L. Wang and E.G. Eddings, “The Fate of Sulfur in Oxy-fired Fluidized Beds,” presentation at the 2011 AIChE Annual Meeting, Minneapolis, MN, Oct. 16-21, 2011.

R.L. Coates, B.R. Coates, R. Helleur and E.G. Eddings, “Scale-up of a Rotary-Kiln-Based Pyrolysis Process,” poster presentation at the International Conference on Thermochemical Conversion Science, Chicago, IL, Sept. 28-30, 2011.

A. Sánchez, Y. Betancur, E.G. Eddings and F. Mondragón. “N2O and CO emissions increase due to high CO2 concentration during oxy-char combustion in fluidized bed”. International conference on Coal Science and Technology. Oviedo, Spain. September 2011.

E.G. Eddings, J. Ahn, R. Okerlund and A. Fry, “SO3 Emissions in Pilot-scale Oxy-fired Pulverized-coal and Circulating-fluid-bed Test Facilities,” presentation at The 2nd International Oxyfuel Combustion Conference, Queensland, Australia, Sept. 12-16, 2011.

A. Sánchez, E.G. Eddings and F. Mondragón. “Nitrogen oxides behavior under oxy-combustion conditions”. paper at Seventh Mediterranean Combustion Symposium. Sardinia, Italy, Sept. 11-15, 2011.

E.G. Eddings and L. Wang, “Bench- and Pilot-Scale Fluidized Bed Research on Oxycoal Combustion,” presentation at 1st Oxy-fuel CFBC Workshop, University of Ottawa – CanmetENERGY, Ottawa, Ontario, Canada, June 27-28, 2011.

L. E. Bool, R. Okerlund and E.G. Eddings, “Impact of Selective Oxygen Injection During Oxy-firing of Coal,” presentation at The 37th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, Florida, June 3-7, 2011.

E.G. Eddings, J. Ahn, L. Wang, R. Okerlund and A. Fry, “Transformations of Fuel Sulfur During Oxy-Coal Combustion,” presentation at The 37th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, Florida, June 3-7, 2011.

E.G. Eddings, L. Wang and J. Ahn, “Bench-Scale Fluid Bed Experiments of SO2/SO3 Formation and Sulfur Capture in N2/O2 and CO2/O2 Environments,” presentation at IEAGHG Special Workshop on SO2/SO3/Hg/Corrosion Issues in Oxycoal Combustion Boiler and Flue Gas Processing Units, London, England, Jan. 25-26, 2011.

E.G. Eddings, J. Ahn, R. Okerlund and A. Fry, “SO3 Measurements Under Oxy-Coal Conditions in Pilot-Scale PC and CFB Combustors,” presentation at IEAGHG Special Workshop on SO2/SO3/Hg/Corrosion Issues in Oxycoal Combustion Boiler and Flue Gas Processing Units, London, England, Jan. 25-26, 2011.

Swensen, D., Eddings, E., Halligan, M., McDonald, M., DesJardin, P., Borodai, S., Swede, D., Bockelie, M., “Fire-explorer – a Graphical User Interace for Fire Modeling,” ASME International Mechanical Engineering Congress and Exposition, Proceedings, 3, pp. 161-166, 2010.

J. Ahn, L. Wang, D. Overacker, R. Okerlund and E.G. Eddings, “Fate of Sulfur Trioxide Under Oxy-Coal Combustion Conditions,” presentation at the 2010 AIChE Annual Meeting, Salt Lake City, UT, Nov. 8-12, 2010.

L. Wang and E.G. Eddings, “Sulfur Release and Sulfur Capture in N2/O2 and CO2/O2 under Fluidized Bed Combustion Conditions,” presentation at the 2010 AIChE Annual Meeting, Salt Lake City, UT, Nov. 8-12, 2010.

T.A. Ring, J. Zhang, H. el Gendy, J.O.L. Wendt, D.M. Rezaei, K.E. Kelly and E.G. Eddings, “High Speed Video Analysis of Oxycoal Combustion in 40kW Coaxial Turbulent Diffusion Flames,” paper presented at the 2010 International Pittsburgh Coal Conference, Istanbul, Turkey, October 11-14, 2010.

D.M. Rezaei, Y. Zhou, J. Zhang, K.E. Kelly, E.G. Eddings, J.O.L. Wendt, “The Effect of Coal Composition on Ignition and Flame Stability in Co-axial Oxy-Fuel Turbulent Diffusion Flames,” paper presented at the 2010 International Pittsburgh Coal Conference, Istanbul, Turkey, October 11-14, 2010.

R.L. Coates, E.G. Eddings and B.R. Coates “Bio-oil Yields from Pyrolysis in a Novel Rotary Reactor,” presentation at the Symposium on Thermal and Catalytic Sciences for Biofuels and Biobased Products, Ames, IA, Sept. 21-23, 2010.

E.G. Eddings, “Oxy-Coal Combustion to Facilitate Carbon Capture,” presentation at the International Advanced Coal Technologies Conference, Laramie, WY, June 23-24, 2010.

C. Scott, F. Derwitsch, D. Fleming, E.G. Eddings, R. Okerlund, B.G. Miller and S.F. Miller, “Micro-Crop Combustion: The Effects of Cofiring Pulverized Coal and Processed Micro-Crop Biomass on Feed Handling, Combustion Performance, Emissions, and Ash Characteristics,” paper presented at 35th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, FL, June 6-10, 2010.

J. Zhang, K.E. Kelly, E.G. Eddings and J.O.L. Wendt, “An Experimental Study of Ignition in 40kW Co-Axial Turbulent Diffusion Oxy-Coal Jet Flames,” paper presented at 35th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, FL, June 6-10, 2010.

L.E. Bool and E.G. Eddings, “Oxy-coal Combustion in a Laboratory CFB Combustor,” paper presented at 35th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, FL, June 6-10, 2010.

M. Christie, N. Degenstein, J. Li, B. Kromer, J. Peck, J. Wilson, L. Rosen, M. Shah, R. Kelly, E. Eddings and J. Adams, “OTM Based Oxy-fuel Combustion for CO2 Capture,” paper presented at 35th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, FL, June 6-10, 2010.

J. Ahn, L. Wang, D. Overacker, Ryan Okerlund and E.G. Eddings, “SO3 Formation During Oxycoal Combustion,” paper presented at 35th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, FL, June 6-10, 2010.

L.E. Bool and E.G. Eddings, “Oxy-Coal Combustion in a Pilot-Scale Circulating Fluidized Bed,” paper presented at the 2009 AIChE Annual Meeting, Nashville, TN, Nov. 8-13, 2009.

J. Adams, E.G. Eddings, J. Wilson and J. Li, “Oxy-Coal Combustion using Oxygen Transport Membranes,” paper presented at the 2009 AIChE Annual Meeting, Nashville, TN, Nov. 8-13, 2009.

J. Zhang, K.E. Kelly, E.G. Eddings and J.O.L. Wendt, “Application of Photo-Imaging Techniques to Quantify Flame Stability Characteristics during Oxy-Coal Combustion,” paper presented at the 2009 AIChE Annual Meeting, Nashville, TN, Nov. 8-13, 2009.

J. Zhang, K.E. Kelly, E.G. Eddings and J.O.L. Wendt, “Oxy-coal combustion: effects of PO2 on coal jet stability in O2/CO2 environments,” paper presented at the 1st International Oxycoal Combustion Conference, Cottbus, Germany, Sept. 8-10, 2009.

E.G. Eddings, R. Okerlund and L. Bool, “Pilot-scale evaluation of oxycoal firing in circulating-fluidized-bed and pulverized-coal-fired test facilities,” paper presented at the 1st International Oxycoal Combustion Conference, Cottbus, Germany, Sept. 8-10, 2009.

J. Wilson, M. Christie, N. Degenstein, M. Shah, J. Li, V. Venkateswaran, E. Eddings and J. Adams, “OTM Based Oxy-fuel Combustion for CO2 Capture,” paper presented at 34th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, FL, May 31-June 4, 2009.

E.G. Eddings, L. Wang, A. Sánchez and F. Mondragón, “Pollutant Formation During Oxycoal Combustion,” paper presented at 34th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, FL, May 31-June 4, 2009.

L.E. Bool, S. Laux and E.G. Eddings, “Oxy-Coal Combustion in a Small-Scale CFB,” paper presented at 34th International Technical Conference on Clean Coal & Fuel Systems, Clearwater, FL, May 31-June 4, 2009.

A. Sánchez, F. Mondragón and E.G. Eddings, “Fuel Nitrogen Evolution During Fluidized Bed Oxycoal Combustion,” paper presented at 20th International Conference on Fluidized Bed Combustion, Xi’an, China, May 18-20, 2009.

Z. Cha, H.R.. Zhang, E.G. Eddings and A.F. Sarofim “Ozonolysis of Biodiesels in the Presence of Various Low Molecular Weight Alchohols,” Preprints of Symposia – American Chemical Society, Division of Fuel Chemistry (2009), 54(1), 58-59.

I. Preciado, E.G. Eddings, A.F. Sarofim, R.B. Dinwiddie, W.D. Porter and M.J. Lance, “Soot Deposit Properties in Practical Flames,” Preprints of Symposia – American Chemical Society, Division of Fuel Chemistry (2009), 54(1), 246-250.

H.R.. Zhang, E.G. Eddings and A.F. Sarofim “Chemical Kinetic Mechanism Additivity,” Preprints of Symposia – American Chemical Society, Division of Fuel Chemistry (2009), 54(1), 46-49.

J. Zhang, E.G. Eddings and J.O.L. Wendt “Oxy-Coal Combustion: Effects of PO2 on Coal Jet Stability In O2/CO2 Environments,” paper presented at 2008 Annual AIChE National Meeting, Philadelphia, PA, Nov. 17-21, 2008.

E.G. Eddings, A. Sánchez, L. Wang and F. Mondragón, “Oxycoal Firing in Circulating Fluidized Bed Boilers,” paper presented at 2008 Annual AIChE National Meeting, Philadelphia, PA, Nov. 17-21, 2008.

K.J. Whitty, E.G. Eddings and B. Morrow, “Biomass Gasification in a Stoker Gasifier,” paper presented at 2008 Annual AIChE National Meeting, Philadelphia, PA, Nov. 17-21, 2008.

A. Santamaria, F. Mondragón and E.G. Eddings, “Chemical and morphological characterization of the soot produced in aromatic and aliphatic flames,” Preprints of Symposia – American Chemical Society, Division of Fuel Chemistry (2008), 53(2), 847-848.

E.G. Eddings, A. Sanchez, L. Wang, D. Wagner, F. Mondragon A.F. Sarofim, “Fundamental Studies and Pilot-Scale Evaluation of Oxycoal Firing in Circulating Fluidized Bed Boilers,” presented at 3rd IEA OxyCoal Workshop, Yokohama, Japan, March 5-6, 2008.

H.R. Zhang, Z. Cha, E.G. Eddings and A.F. Sarofim, “Characterization of Bio-diesels and Fossil Fuels,” paper presented at 2007 Annual AIChE National Meeting, Salt Lake City, UT, Nov. 5-9, 2007.

J. Zhang, E.G. Eddings and J.O.L. Wendt “Studies on Coal Jet Ignition under Oxy-fuel Combustion Conditions,” paper presented at 2007 Annual AIChE National Meeting, Salt Lake City, UT, Nov. 5-9, 2007.

H.R. Zhang, E.G. Eddings and A.F. Sarofim, “Correlations between Fuel Structural Features and Benzene Formation,” paper presented at 2007 Annual AIChE National Meeting, Salt Lake City, UT, Nov. 5-9, 2007.

A. Sánchez, F. Mondragón and E.G. Eddings, “CO2 Interaction with Char Nitrogen in Oxy-Coal Combustion Systems,” paper presented at 2007 Annual AIChE National Meeting, Salt Lake City, UT, Nov. 5-9, 2007.

H.R. Zhang, E.G. Eddings and A.F. Sarofim, “Coal Devolatilization at Very Slow Heating Rates,” paper presented at 2007 Annual AIChE National Meeting, Salt Lake City, UT, Nov. 5-9, 2007.

C.A. Wight and E.G. Eddings, “Science-Based Simulation Tools for Hazard Assessment and Mitigation,” 7th International Symposium on Special Topics in Chemical Propulsion, Kyoto, Japan, Sept. 17-21, 2007.

H.R. Zhang, E.G. Eddings, A.F. Sarofim, “The Role of the Allylic Radical and Its Related Speceis in Aromatic Precursor Chemistry”, Fifth International Mediterranean Combustion Symposium, September 9-13th, 2007, Monastir, Tunisia.

H.R. Zhang, E.G. Eddings, A.F. Sarofim, “Correlation of Pollutant Formation And Fuel Structural Composition In A Near Stoichiometric Gasoline Flame”, 10th International Congress on Combustion By-Products and Their Health Effects, Ischia, Italy, June 17-20th, 2007.

H.R. Zhang, Z. Cha, E.G. Eddings, and A.F. Sarofim, “Characterization of Bio-diesels and Fossil Fuels and Correlations between Fuel Structures and Combustion Emission”, Preprints of Symposia, American Chemical Society, Division of Fuel Chemistry (2007), 52(2), 248-251.

H.R. Zhang, E.G. Eddings, A.F. Sarofim, C.L. Mayne, Z. Yang and R.J. Pugmire, “Use of Functional Group Analysis for the Selection of Surrogates for Jet Fuels”, International Soot Workshop, Ana Capri, Italy, May 14-16th, 2007.

I. Preciado, E.G. Eddings and A. F. Sarofim, “Study of Soot Deposition and its Effect on Heat Transfer from a Pool Fire to an Engulfed Container,” 5th U.S. Combustion Meeting, San Diego, CA, March 25-28th, 2007.

J.S. Lighty, E.G. Eddings, N.B. Orton, A. F. Sarofim and Nancy Yang, “Characterization of Young Soot from an Inverse Diffusion Flame,” 5th U.S. Combustion Meeting, San Diego, CA, March 25-28th, 2007.

Z. Yang, H.R. Zhang, E.G. Eddings, and A.F. Sarofim, “Selection of Inception Species for Soot Modeling in Premixed Flames”, 5th U.S. Combustion Meeting, San Diego, CA, March 25-28th.

T.L. Henriksen, T.A. Ring, D. Call, E.G. Eddings, A.F. Sarofim, “Determination of Soot Refractive Index as a Function of Height in an Inverse Diffusion Flame,” 5th U.S. Combustion Meeting, San Diego, CA, March 25-28th, 2007.

H.R. Zhang, M.P. Pham, L.K. Huynh, T.N. Truong, E.G. Eddings, and A.F. Sarofim, “Kinetics of Ring Closure Reactions and Its Role in Polymerization of Aromatics”, 5th U.S. Combustion Meeting, San Diego, CA, March 25-28th, 2007.

H.R. Zhang, E.G. Eddings, and A.F. Sarofim, C.L. Mayne, Z.Yang and R.J. Pugmire, “Use of Functional Group Analysis for the Selection of Surrogates for Jet Fuels”, 5th U.S. Combustion Meeting, San Diego, CA, March 25-28th, 2007.

H.R. Zhang, E.G. Eddings, and A.F. Sarofim, “Pollutant formation in premixed and diffusion flames of paraffinic fuels using the reduced Utah Surrogate Mechanisms,” Preprints of Symposia – American Chemical Society, Division of Fuel Chemistry (2007), 52(1), 144-147.

H.R. Zhang, E.G. Eddings, and A.F. Sarofim, “Pollutant formation in a near stoichiometric gasoline flame as a function of fuel structural composition,” paper presented at 233rd ACS National Meeting, Environmental Division, Chicago, IL, March 25-29, 2007.

H.R. Zhang, M.P. Pham, T.N. Truong, E.G. Eddings, and A.F. Sarofim, “Polymerization Reactions of Aromatics in a Fuel-Rich 20-Torr Naphthalene Premixed Flame Enhanced by Ring Closure Steps,” Preprints of Symposia – American Chemical Society, Division of Fuel Chemistry (2006), 51(2), 733-735.

C. Senior, J. Ma, K. Davis, and E. Eddings, “CFD modeling study of flame stability and NOx formation from combustion of pulverized petroleum coke,” Proceedings of the International Technical Conference on Coal Utilization & Fuel Systems (2006), 31st(Vol. 2), 641-652.

A Santamaria, F. Mondragon, W. Quinones, E.G. Eddings, and A.F. Sarofim, “Ethanol Effect on Soot Formation in an Ethylene Inverse Diffusion Flame,” paper presented at 231st ACS National Meeting, Atlanta, GA, March 26-30, 2006.

H.R. Zhang, E.G. Eddings, and A.F. Sarofim, “Reactions and Kinetics of Benzene and Enol Formation in a Stoichiometric Cyclohexane Flame,” Preprints of Symposia – American Chemical Society, Division of Fuel Chemistry (2006), 51(1), 229-231.

H.R. Zhang, A. Violi, E.G. Eddings, and A.F. Sarofim, “Soot Formation Modeling Using Modified Moments Method,” Preprints of Symposia – American Chemical Society, Division of Fuel Chemistry (2006), 51(1), 183-184.

H.R. Zhang, E.G. Eddings, and A.F. Sarofim, “Modeling Naphthalene Formation in a Premixed Propylene Flame,” Preprints of Symposia – American Chemical Society, Division of Fuel Chemistry (2006), 51(1), 221-222.

H.R. Zhang, E.G. Eddings, and A.F. Sarofim, “Comprehensive Analysis of Benzene Formation in Premixed Flames Based on Fuel Structures,” Preprints of Symposia – American Chemical Society, Division of Fuel Chemistry (2006), 51(1), 351-352.

H.R. Zhang, E.G. Eddings, and A.F. Sarofim, “Combustion Reactions of Natural Gas and Liquid Transportation Fuels Using Generic Rates for Paraffins,” Preprints of Symposia – American Chemical Society, Division of Fuel Chemistry (2006), 51(1), 232-233.

E.G. Eddings, S. Yan, H. Zhang, N.B. Marsh and A.F. Sarofim, C.J. Montgomery and V. Katta, “Methodology for the Simulation of Complex Hydrocarbon Mixtures,” 2005 AIChE Annual Meeting, Cincinnati, OH, Oct. 30 – Nov. 4, 2005.

H. Zhang, E.G. Eddings and A.F. Sarofim, “Modeling Benzene and Naphthalene Formation in a Premixed Propylene Flame,” technical paper, Fall Meeting of the Western States Section, Combustion Institute, Stanford University, Oct. 16-18, 2005.

H. Zhang, E.G. Eddings and A.F. Sarofim, “Combustion Reactions of Paraffin Components in Liquid Transportation Fuels Using Generic Rates,” technical paper, 4th Mediterranean Combustion Symposium, Lisbon, Portugal, Oct. 6-10, 2005.

T.L. Henriksen, G. Nathan, Z. Alwahabi, J. P. Spinti, E.G. Eddings, P.J. Smith, “Soot Volume Fraction from Extinction in JP8 and Heptane Pool Fires,” Fall Meeting of the Western States Section of the Combustion Institute, October 17-18, 2005, Stanford, CA.

A. Santamaría, A. Molina, F. Mondragón, N.D. Marsh, E.G. Eddings and A.F. Sarofim, “Characterization of Soot Produced in an Ethylene Inverse Diffusion Flame,” technical paper, International Coal Science and Technology Conference, Okinawa, Japan, October 9-14, 2005.

A. Santamaría, F. Mondragón, J.J. Fernandez, E.G. Eddings and A.F. Sarofim, “Average Structural Analysis of Soot Material Soluble in Chloroform,” technical paper, International Coal Science and Technology Conference, Okinawa, Japan, October 9-14, 2005.

H. Zhang, E.G. Eddings and A.F. Sarofim, “The Development and Validation of a Mechanism for Surrogates of Real Fuels,” 6th International Conference on Chemical Kinetics, NIST, Gaithersburg, MD, July 27, 2005.
C. J. Montgomery, A.F. Sarofim, I. Preciado, N.D. Marsh, E.G. Eddings, J.W. Bozzelli, “Experimental and Numerical Investigation of Soot-Reducing Fuel Additives,” technical paper, 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference, Tucson, AZ, July 10-13, 2005.

E.G. Eddings, W. Ciro and C.A. Wight, “High Energy Materials in Fires: Influence of Fire Environment on Violence of Reactions,” 2005 Joint Army/Navy/NASA/Air Force (JANNAF) Anuual Meeting of CS/APS/PSHS Subcommittees, Charleston, SC, June 13-17, 2005.

E.G. Eddings, Á.B. Palotás, I. Preciado, N.D. Marsh and A.F. Sarofim, “Development of a Methodology for Screening Multi-Functional Fuel Additives,” technical paper, 19th microCAD International Scientific Conference, Miskolc, Hungary, March 10-11, 2005.

J.R. Valentine, K.A. Davis, M.K. Denison, E.G. Eddings, D. Cron, R. Morrow, T. Giaier, “A Computational Model Study of NOx Reduction Strategies for a Coal-fired Stoker Furnace,” technical paper, U.S./China Industrial Boiler Workshop, Beijing, China, June 10-11, 2004.

C.J. Merrill, J.S. Lighty, E.G. Eddings and A.F. Sarofim, “Investigation of the Oxidation and Fragmentation of Soot in a Two-Stage Flat Flame Burner System Utilizing a Scanning Mobility Particle Sizer,” Work in Progress Poster, 30th International Symposium on Combustion, Chicago, IL, July 25-30, 2004.

I. Preciado, N.D. Marsh, E.G. Eddings and A.F. Sarofim, “Soot Generation from JP-8 and JP-8 Plus Additives at Different Equivalence Ratios in a Drop Tube Furnace,” Work in Progress Poster, 30th International Symposium on Combustion, Chicago, IL, July 25-30, 2004.

C.J. Merrill, J.S. Lighty, E.G. Eddings and A.F. Sarofim, “Investigation of the Oxidation and Fragmentation of Soot in a Two-Stage Flat Flame Burner System Utilizing a Scanning Mobility Particle Sizer,” presented at the Western States Section of the Combustion Institute, Davis, CA, March 29-30, 2004.

C. Senior, A. F. Sarofim and E.G. Eddings, “Behavior and Measurement of Mercury in Cement Kilns,” technical paper, 2003 IEEE-IAS/PCA Cement Industry Technical Conference, Dallas, TX, May 4-9, 2003.

Z.M. Djurisic and E.G. Eddings, “NOx Emissions from Intermediate-Temperature Combustion of Steel-Industry By-Product Gases,” paper presented at the Third Joint Meeting of the U.S. Sections of the Combustion Institute, March 16-19, 2003.

P Jiang, J.S. Lighty, A.F. Sarofim and E.G. Eddings, “Modeling of the Coagulation of Charged Particles,” paper presented at the Third Joint Meeting of the U.S. Sections of the Combustion Institute, March 16-19, 2003.
W. Ciro, E.G. Eddings and A.F. Sarofim, “Thermal Behavior of a High-Energy Material Immersed in a Fire,” paper presented at the Third Joint Meeting of the U.S. Sections of the Combustion Institute, March 16-19, 2003.

S. Yan, W. Ciro, E.G. Eddings and A.F. Sarofim, “Experimental Study of Burning Rate in Jet-Fuel Pool Fires,” paper presented at the Third Joint Meeting of the U.S. Sections of the Combustion Institute, March 16-19, 2003.

L. Bool, H. Kobayashi, K. Wu, D. Thompson, E. Eddings, R. Okerlund, J. Wendt, M. Cremer, and D. Wang, “Oxygen for NOx Control – A Step-Change Technology?,” technical paper, 19th Annual International Pittsburgh Coal Conference, Pittsburgh, PA, Sept. 2002.

A.F. Sarofim, J.S. Lighty and E.G. Eddings, “Fine Particles: Health Effects, Characterization, Mechanisms of Formation, and Modeling,” ACS Fuel Chemistry Division Preprints, 47 (2), 618, 2002.

B. Chudnovsky, A. Talanker, L. Levin, A. Vikhansky, E. Bar-Ziv, E. Eddings, A.F. Sarofim, “Prediction of Furnace and Boiler Performance: Coal Quality Factor,” 27th International Technical Conference on Coal Utilization and Fuel Systems, March 4-7, Clearwater, Florida, 2002.

K. Kuehlert, J. Ma, S. Nester, J. Rabovitzer, S. Wohadlo, M. Denison, E. Eddings, M. Bockelie, “Development and Validation of a Fluent-Based CFD Model for Combined Wood Waste, Sludge and Natural Gas Combustion in a Stoker Boiler,” 2001 TAPPI Engineering/Finishing & Converting Conference (Pulp & Paper Industry), San Antonio, Texas, Sept. 16-20, 2001.

B. Sun, A.F. Sarofim, E.G. Eddings, and and D.J. Paustenbach, “Reducing PCDD/PCDF Formation and Emission from a Hazardous Waste Combustion Facility — Technological Identification, Implementation, and Achievement,” DIOXIN 2001, 21st International Symposium on Halgonated Environmental Organic Pollutants and POPS, Kyongju, Korea, Sept. 9-14, 2001.

A.Violi, X. Chen, G. Lindstrom, E.G. Eddings, A.F. Sarofim, “The Validation Website: A Combustion Collaboratory Over the Internet,” proceedings of the 2001 International Conference on Computational Science (ICCS 2001), San Francisco, CA, May 28-30, 2001.

B. Chudnovsky , A. Talanker, A. Mugenstein, G. Shpon, A. Vikhansky, T. Elperin, E. Bar-Ziv, M. Bockelie, E.G. Eddings, A.F. Sarofim, “Reduction of NOx and Particulate Emissions from Coal-Fired Boilers by Modification of Coal Nozzles and Combustion Tuning,” proceedings of PowerGen Europe 2001, Brussels, Belgium, May 29-31, 2001.

A. Molina, E.G. Eddings, D.W. Pershing and A.F. Sarofim, “Production of Nitrogen Oxide During Char Oxidation at Pulverized Coal Combustion Conditions,” Paper 210, presented at the Second Joint Meeting of the United States Sections of the Combustion Institute, Oakland, CA, March 25-28, 2001.

E.G. Eddings, W. Ciro, A.F. Sarofim and M. Beckstead, “Fast Cook-off Tests of an HMX-based Propellant in Pool Fires,” proceedings of the 2000 Joint Army/Navy/NASA/Air Force (JANNAF) CS/APS/PSHS Joint Meeting, Monterrey, CA, Nov. 13-17, 2000.

J.S. Lighty, D.W. Pershing, Z.M. Djurisic, E.G. Eddings, M. Denison, M.J. Bockelie and M.P. Heap, “Achieving Ultra-Low NOx Emissions in Coal-Fired Utility Boilers,” Proceedings of the Third Joint China/USA Chemical Engineering Conference, pages 07-017 to 07-022, Beijing, China, September 25-28, 2000.

E.G. Eddings, “Case Studies: Application of Computational Fluid Dynamics to Industrial Problems,” Annual Conference of the National Research Center (CNR) for Italy, Istituto Motori, Naples, Italy, Nov. 20-27, 1999.

K.A. Davis, J.R. Valentine, E.G. Eddings and M.P. Heap, “Evaluating the Effects of Low-NOx Retrofits on Carbon in Ash Levels,” proceedings of the EPRI/EPA/DOE Combined Utility Air Pollution Control Symposium: The Mega Symposium, Atlanta, GA, Aug. 16-20, 1999.

E.G. Eddings, A. Molina, D.W. Pershing, A.F. Sarofim, K.A. Davis, M.P Heap, T.H. Fletcher, H. Zhang, “Minimization of NO Emissions from Multi-Burner Coal-Fired Boilers,” DOE Contractor Review Meeting, Pittsburgh, PA, June 2, 1999.

K.A. Davis, J.R. Valentine, E.G. Eddings and M.P. Heap, “Waterwall Corrosion after Combustion Modifications for NOx Control,” presented at the 24th International Technical Conference on Coal Utilization & Fuel Systems, Clearwater, Florida, March 10, 1999

D.A. Cacciatore, E.G. Eddings, J.S. Lighty, and D.W. Pershing, “Minimizing NOx Emissions from By-Product Fuels in Steel Making,” Presentation at AIChE Annual Meeting, Miami, Florida, November 18, 1998.
K.A. Davis, E.G. Eddings, M.P. Heap, A. Facchiano, R.R. Hardman, “Computational investigation of carbon-in-ash levels for a wall-fired boiler after low-NOx combustion modifications,” International Pittsburgh Coal Conference, September, 1998.

M.J. Bockelie, B.R. Adams, M.A. Cremer, K.A. Davis, E.G. Eddings, J.R. Valentine, and P.J. Smith, “Computational simulations of industrial furnaces,” Int’l Symp. on Computational Technologies For Fluid/Thermal/Chemical Systems with Industrial Applications, Joint ASME/JSME Conference, San Diego, CA, July, 1998.

D.A. Cacciatore, E.G. Eddings, J.S. Lighty, and D.W. Pershing, Minimizing NOx Emissions from By-Product Fuels in Steel Making, Work-In-Progress Poster at The Twenty-Seventh International Symposium on Combustion, Boulder, Colorado, August 2, 1998.

Cremer, M.A., Eddings, E.G., Martz, T., Muzio, L.J., Quartucy, G., Hardman, R., Cox, J., and Stallings, J., “Assessment of SNCR Performance on Large Coal-Fired Utility Boilers,” presented at 1998 DOE Conference on Selective Catalytic and Non-Catalytic reduction for NOx Control,” Pittsburgh, PA, May, 1998.

R.R. Hardman, J. Cox, M.A. Cremer, E.G. Eddings, L. Muzio, T. Martz, J. Stallings, “Evaluation of SNCR Performance on Large-Scale Coal-Fired Boilers,” Institute of Clean Air Companies Forum, Durham, NC, March, 1998.

K.A. Davis, E.G. Eddings, M.P. Heap, A. Facchiano, R.R. Hardman, “Effect of low-NOx firing conditions on carbon-in ash,” American Flame Research Committee Spring Meeting, March, 1998.

E.G. Eddings, D.W. Pershing, “Organic Emissions from Cement Kilns,” Technical Mill Session, Fall Annual Meeting of the Portland Cement Association, Chicago, Illinois, Sept. 22-23, 1997.

E.G. Eddings, K.A. Davis, M.P. Heap, J.R. Valentine, A. Facchiano, R. Hardman, N. Grigas, “Effect of Low NOx Firing Conditions on Increased Carbon-in-Ash and Water-Wall Corrosion Rates,” proceedings of the EPRI/EPA/DOE Mega Symposium on NOx/SOx/Air Toxics, Washington, D.C., Aug. 25-29, 1997.

H. Krigmont, D. Oehley, F. Spokoyny, J. Hogsett, G. Quartucy, L. Muzio and E.G. Eddings, “SNCR Retrofit Experience on Four Gas- and Coal-Fired Boilers in Tchaikovsky, Russia,” proceedings of the EPRI/EPA/DOE Mega Symposium on NOx/SOx/Air Toxics, Washington, D.C., Aug. 25-29, 1997.

E.G. Eddings, J Brouwer and F.E. Spokoyny, “Modeling Urea-Based SNCR in a Gas-Fired Utility Boiler,” First Conference on Selective Catalytic & Non-Catalytic Reduction for NOx Control, Pittsburgh, May 15-16, 1997.

K.A. Davis, J.R. Valentine, E.G. Eddings, J Brouwer, M.P Heap, R.H. Hurt, R. Hardman and N. Grigas, “Advanced Prediction of Unburned Carbon Levels in Two Utility Boilers Retrofitted for In-Furnace NOx Reduction,” Third Annual Conference on Unburned Carbon in Utility Fly Ash, Pittsburgh, May 13-14, 1997.

E.G. Eddings J. Brouwer, M.P. Heap, D.W. Overacker and D.W. Pershing, “Determination of Organic Emissions From Raw Materials and Waste Feedstocks in Cement Kilns,” Waste Combustion in Boilers and Industrial Furnaces, Air & Waste Management Association Specialty Conference, St. Louis, April 8-10, 1997.

E.G. Eddings and D.W. Pershing, “Hydrocarbon Emissions Due to Raw Materials in the Manufacture of Portland Cement,” proceedings of the 89th Annual Meeting of the Air & Waste Management Association, Nashville, TN, June 23-28, 1996.

M.J. Bockelie, B.R. Adams, E.G. Eddings and P.J. Smith, “Simulations of High-Temperature Reacting Flows for Industrial Processes” proceedings of the 5th International Conference on Numerical Grid Generation in Computational Field Simulations, Misissipi State University, Apr. 1-5, 1996.

R. Beittel, E. Reciker, G. Gielda, J. Brouwer, and E.G. Eddings, “U-Fired Test Facility Design and Analysis for the Low Emission Boiler System Development Program”, proceedings of the International Joint Power Generation Conference, October, 1995.

J. Brouwer, E.G. Eddings, M.P. Heap, D.W. Pershing and P.J. Smith, “Effects of Mixing and Thermal Quenching on NO Reduction by Selective Non-Catalytic Reduction in the Presence of CO”, proceedings of the 1995 American Flame Research Committee Fall International Symposium, Monterrey, California, October 15-18, 1995.

E.G. Eddings and D.W. Pershing, “Hydrocarbon Emissions Due to Raw Materials in the Manufacture of Portland Cement,” Manufacturing Technical Session, Fall Annual Meeting of the Portland Cement Association, Overland Park, Kansas, Sept. 18, 1995.

C. Rossi-Lane, B.L. McDonald, E. Ecock, E.G. Eddings, G. Norman, L. Radak, P. Strangway, and K. Zammit, “An Assessment of Boiler Impacts from Reduced Air Flow Operation,” proceedings of the 1995 Joint Symposium on Stationary Combustion NOx Control, May, 1995.

D.E. Thornock, J.G. McGowan, N.M. Phyfe, E.G. Eddings, M.P. Heap and P.J. Smith, “Scaling NOx Results using CFD-Based Combustion Simulations”, proceedings of the Pacific Rim International Conference on Environmental Control of Combustion Processes, Maui, Hawaii, October 16-20, 1994.

E.G. Eddings, M.P. Heap, D.W. Pershing, A.F. Sarofim, P.J. Smith, and J.P. Spinti, “The Design of a Coal-Fired High-Temperature Furnace for an Advanced Combined Cycle System”, proceedings of the Second International Conference on Combustion Technologies for a Clean Environment, Lisbon, Portugal, July 26-29, 1993.

E.G. Eddings, M.P. Heap, D.W. Pershing, A.F. Sarofim, P.J. Smith, and J.P. Spinti, “Coal Combustor for a High Performance Power System – The Influence of Process Design Parameters on NOx Emissions”, proceedings of the 1993 Joint Symposium on Stationary Combustion NOx Control, Miami Beach, Florida, May 24-27, 1993.

P.J. Smith, E.G. Eddings, M.P. Heap, D.W. Pershing, and A.F. Sarofim, “An Improved Model for Predicting NOx Formation in Practical Coal Flames”, proceedings of the 1993 Joint Symposium on Stationary Combustion NOx Control, Miami Beach, Florida, May 24-27, 1993.

E.G. Eddings, M.P. Heap, P.J. Smith, C.L. Senior, D.W. Pershing, J.P. Spinti, A.F. Sarofim, “Combustor Concepts for Advanced, Coal-Fired, High-Performance Power Systems”, Seventh Annual Conference on Clean and Efficient Combustion of Fossil Fuels and Toxic Wastes, Park City, Utah, March 2-5, 1993.

E.G. Eddings and J.S. Lighty, “A Study of Metal Contaminant Behavior in a Pilot-Scale Rotary Kiln,” poster presentation at the Twenty Fourth International Symposium on Combustion, Sydney, Australia, July 5-10, 1992.

E.G. Eddings and J.S. Lighty, “Behavior of Metals on Solid Substrates During Incineration,” paper #91-57, Western States Section/The Combustion Institute, 1991 Fall Meeting, Los Angeles, California, Oct. 14, 1991.

E.G. Eddings and J.S. Lighty, “Fundamental Studies of Metal Behavior During Solids Incineration,” The Second International Congress on Toxic Combustion By-products: Formation and Control, Salt Lake City, Utah, March 27, 1991.

McClennen, W.H., N.S. Arnold, J.S. Lighty, E.G. Eddings, E.R. Lindgren, K.A. Roberts, H.L.C. Meuzelaar, “Monitoring the Evolution of Organic Compounds from the Thermal Treatment of Contaminated Soil Samples Using Short Column GC/MS,” ACS Fuels Division, Incineration Symposium, Miami Beach, Florida, September 1989.

Lighty, J.S., E.G. Eddings, Deng Xiao-Xue, L.M. VanOs, D.W. Pershing, “A Fundamental Study of the Rate of Thermal Desorption of Contaminants from Soil Beds,” proceedings of the 82nd Annual Air and Waste Management Association Meeting, Anaheim, California, June 1989.