Peer-Reviewed Publications
J. Malzahn, E.G. Eddings, “Effect of secondary gas-phase reactions (SGR) in pyrolysis of carbon feedstocks for anisotropic carbon materials production – 3: Modifying non-coking coal tar through co-pyrolysis of coal with linear low-density polyethylene and high-impact polystyrene,” Journal of Analytical and Applied Pyrolysis, 175, 106208, October 2023.
A. Prlina, E.G. Eddings, R. Breault, “Multiphysics Simulation of Supercritical CO2 Gasification for Hydrogen Production,” International Journal of Energy for a Clean Environment, 24(8):1-14, June 2023.
Z. Karimi, J. Moon. J. Malzahn, E.G. Eddings, R. Warren, “Ultra-low cost supercapacitors from coal char: effect of electrolyte on double layer capacitance,” Energy Advances, 2, 1036-1044, May 2023.
Z. Sun, C.K. Russell, K.J. Whitty, E.G. Eddings, J. Dai, Y. Zhang, M. Fan, Z. Sun, “Chemical looping-based energy transformation via lattice oxygen modulated selective oxidation,” Progress in Energy and Combustion Science, 96, 101045, May 2023.
T.S. Draper, A. Gunnarsson, A. Fry, K. Andersson, T. Ring and E.G. Eddings, “A Comparison of Industrial-Scale Radiometer Heat Flux Measurements Between Pulverized-Coal and Coal/Biomass Co-firing Combustion,” ASME Open Journal of Engineering, 2, 021007, January 2023.
X. He, Y.Gao, Y. Shi, X. Zhang, Z. Liang, R. Zhang, X. Song, Q. Lai, H. Adidharma, A.G. Russell, E.G. Eddings, W. Fei, F. Cheng, S.C.E. Tsang, J. Wang, M. Fan, “[EMmim][NTf2] – A Novel Ionic Liquid (IL) in Catalytic CO2 Capture and ILs’ Applications,” Advanced Science, 10, 3, 2205352, January 2023.
K. Sun, T. Wang, W. Gong, W. Lu, X. He, E.G. Eddings and M. Fan, “Synthesis and Potential Applications of Silicon Carbide Nanomaterials/Nanocomposites,” Ceramics International, 48, 22, 32571-32587, November 2022.
T. Allguren, K. Andersson, A. Fry, E.G. Eddings, “NO Formation during co-combustion of coal with two thermally treated biomasses,” Fuel Processing Technology, 235, 107365, October 2022.
J. Malzahn, I. Preciado, M. Weisenberger, E.G. Eddings, “Effect of secondary gas-phase reactions (SGR) in pyrolysis of carbon feedstocks for anisotropic carbon materials production – 2: Effects of SGR on tars produced from varying ranks of coal,” Journal of Analytical and Applied Pyrolysis, 165, 105579, August 2022.
J. Malzahn, I. Preciado, D. Wang, M. Weisenberger, E.G. Eddings, “Effect of secondary gas-phase reactions (SGR) in pyrolysis of carbon feedstocks for anisotropic carbon materials production – 1: Controlling SGR to modify intermediate coal tar species to improve pitch anisotropy,” Journal of Analytical and Applied Pyrolysis, 164, 105541, June 2022.
W. Lu, T. Wang, Z. He, K. Sun, Z. Huang, G. Tan, E.G. Eddings, H. Adidharma, M. Fan, “A New Method for Preparing Excellent Electrical Conductivity Carbon Nanofibers from Coal Extraction Residual,” Cleaner Engineering and Technology, 4, 100109, October 2021.
J. Ding, L. Huang, G. Ji, Y. Zeng, Z. Chen, E.G. Eddings, M. Fan, Q. Zhong, H. Kung, “Modification of Catalytic Properties of Hollandite Manganese Oxide by Ag Intercalation for Oxidative Acetalization of Ethanol to Diethoxyethane,” ACS Catalysis, 11, 9, 5347-5357, April 19, 2021.
O. Chansa, Z. Luo, E.G. Eddings, C. Yu, “Alkali release measurement with Laser-Induced Breakdown Spectroscopy and kinetic modeling during oxy-fuel co-combustion of biomass and coal,” Fuel, 289, 119658, 1 April 2021.
X. Liang, Q. Wang, Z. Luo, E.G. Eddings, T.A. Ring, S. Li, J. Lin, J. Yan, X. Yang, X. Jia, “Experimental Investigation on Sulfur-containing Products in Pressurized Oxy-Fuel Pyrolysis of Pulverized Coal,” Journal of Cleaner Production, 279, 123818, 10 January, 2021.
X. Liang, Q. Wang, Z. Luo, E.G. Eddings, T.A. Ring, S. Li, P. Yu, J. Yan, X. Yang, X. Jia, “Experimental and Numerical Investigation on Nitrogen Transformation in Pressurized Oxy-Fuel Combustion of Pulverized Coal,” Journal of Cleaner Production, 278, 123240, 1 January, 2021.
W. Gong, R. Ye, J. Ding, T. Wang, X. Shi, C. Russell, J. Tang, E.G. Eddings, Y. Zhang, M. Fan, “Effect of copper on highly effective Fe-Mn based catalysts during production of light olefins via Fischer-Tropsch process with low CO2 emission,” Applied Catalysis B: Environmental, 278, 119302, 5 December 2020.
Q. Tang, F. Shi, K. Li, W. Ji, J. Leszczynski, A.G. Russell, E.G. Eddings, Z. Shen, M. Fan, “Unveiling the critical role of p-d hybridization interaction in M13-nGan clusters on CO2 adsorption,” Fuel, 280, 118446, 15 November 2020.
X. He, T. Wang, W. Lu, K. Sun, Z. Huang, A.K. Goroncy, I. Ratnayake, E.G. Eddings, M. Fan, “A Win-Win Method for Generating Carbon Material Precursors of Carbon Nanofibers from Coal and CO2 and the Associated Mechanism,” Fuel, 272, 117712, 15 July 2020.
T. Wang, A.H. Rony, K. Sun, W. Gong, X. He, W. Lu, M. Tang, R. Ye, J. Yu, L. Kang, H. Luo, S.J. Smith, E.G. Eddings, M. Fan, “Carbon Nanofibers Prepared from Solar Pyrolysis of Pinewood as Binder-free Electrode Materials for Flexible Supercapacitors,” Cell Reports Physical Science, Vol. 1, No. 6, 100079, 24 June 2020.
X. Liang, Q. Wang, Z. Luo, E.G. Eddings, T.A. Ring, S. Li, J. Lin, S. Xue, L. Han, G. Xie, “Experimental and Numerical Investigation on Sulfur Transformation in Pressurized Oxy-Fuel Combustion of Pulverized Coal,” Applied Energy, 253, 113542, 2019.
D. Wang, T.H. Fletcher, S. Mohanty, H. Hu and E.G. Eddings “Modified CPD Model for Coal Devolatilization at UCTT Conditions,” Energy & Fuels, 33, 4, 2981-2993, 2019.
F.B. Shareh, G.D. Silcox and E.G. Eddings “Calculated impacts of diluents on flame temperature, ignition delay and flame speed of methane-oxygen mixtures at high pressure and low to moderate temperatures,” Energy & Fuels, 32, 3891-3899, 2018.
J. Lu, L. Fu, X. Li and E.G. Eddings “The capture efficiency of coal/biomass co-combustion ash in an electrostatic field,” Particuology, 40, 80-87, 2018.
H. Zhang, S. Li, K.E. Kelly and E.G. Eddings “Underground in Situ Coal Thermal Treatment for Synthetic Fuels Production,” Progress in Energy and Combustion Science, 62, 1-32, 2017.
J. Lu, B. Xu, Y. Lu, X. Deng and E.G. Eddings “Experimental studies on charging and electric field characteristics of biomass/coal co-combustion ash,” Fuel, 203, 478-487, 2017.
E.G. Eddings, D. McAvoy and R.L. Coates, “Co-firing of Pulverized Coal with Pinion Pine/Juniper Wood in Raw, Torrefied and Pyrolyzed Forms,” Fuel Processing Technology, 161, 273-282, 2017.
H. Li, S. Li, W. Li, E.G. Eddings, Q. Ren, M. Xu, and Q. Lu “Coal Combustion Emission and Ash Formation Characteristics at High Oxygen Concentration in a 1MWth Pilot-scale Oxy-fuel Circulating Fluidized Bed,” Applied Energy, 197, 203-211, 2017.
W.M. Eldredge, P. Toth, L. Centauri, E.G. Eddings, K.E. Kelly, T.A. Ring, A. Schonbucher, J.N. Thornock and P.J. Smith, “A Collaboration-based Approach to CFD Model Validation and Uncertainty Quantification (VUQ) Using Data from a Laminar Helium Plume,” Flow, Turbulence and Combustion, 97 (2), 427-449, 2016.
S. Gupta, J.J. Adams, J. Wilson, E.G. Eddings, M. Mahapatra, and P. Singh “Performance and post-test characterization of an OTM system in an experimental coal gasifier”,” Applied Energy, 165, 72-80, 2016.
Y. Zhao, J. Xiao, M. Ding, E.G. Eddings, X. Wei, X. Fan, and Z. Zong “Sequential Extraction and Thermal Dissolution of Baiyinhua Lignite in Isometric CS2/Acetone and Toluene/Methanol Binary Solvents,” Energy & Fuels, 30, 47-53, 2016.
K.E. Kelly, D. Wang, M. Hradisky, G.D. Silcox, P.J. Smith, E.G. Eddings and D.W. Pershing “Underground Coal Thermal Treatment as a Potential Low-Carbon Energy Source,” Fuel Processing Technology, Vol. 144, pp. 8-19, 2016.
P. Toth, T. Draper, A.B Palotas, T.A. Ring, and E.G. Eddings, “Three-dimensional combined pyrometric sizing and velocimetry of combusting coal particles II. Pyrometry,” Applied Optics, Vol. 54 (15), 4916–4926, 2015.
P. Toth, T. Draper, A.B Palotas, T.A. Ring, and E.G. Eddings, “Three-dimensional combined pyrometric sizing and velocimetry of combusting coal particles I. Velocimetry,” Applied Optics, Vol. 54 (13), 4049–4060, 2015.
L. Wang, S. Li and E.G. Eddings, “Fundamental Study of Indirect vs. Direct Sulfation under Fluidized Bed Conditions,” Industrial and Engineering Chemistry Research, 54 (14), pp. 3548–3555, 2015.
P. Toth, A.B. Palotas, T.A. Ring, E.G. Eddings, R. Vander Wal and J.S. Lighty, “The effect of oxidation pressure on the equilibrium nanostructure of soot particles,” accepted for publication, Combustion and Flame, 162 (6), 2422-2430, 2015.
K. Gneshin, R.L. Krumm and E.G. Eddings, “Porosity Evolution and Structure During Coal Pyrolysis in Large Particles at Very Slow Heating Rates,” Energy & Fuels, 29 (3), 1574-1589, 2015.
P. Toth, Z. Zhan, Z. Fu, A.B. Palotas, E.G. Eddings and T.A. Ring, “The potential of on-line optical flow measurement in the control and monitoring of pilot-scale oxy-coal flames,” Experiments in Fluids, 55:1727, 2014.
D. Rezaei, Y. Zhou, J. Zhang, K. Kelly, E.G. Eddings, R. Pugmire, M. Solum and J.O.L. Wendt, “The Effect of Coal Composition on Ignition and Flame Stability in Coaxial Oxy-fuel Turbulent Diffusion Flames,” Energy & Fuels, 27 (8), 4935-4935, 2013.
P. Toth, J.K. Farrer, A.B. Palotas, J.S. Lighty, and E.G. Eddings, “Automated analysis of heterogeneous carbon nanostructures by high-resolution electron microscopy and on-line image processing,” Ultramicroscopy, 129, 53-62, 2013.
D. Rezaei, Y. Zhou, J. Zhang, K. Kelly, E.G. Eddings, R. Pugmire, M. Solum and J.O.L. Wendt, “The Effect of Coal Composition on Ignition and Flame Stability in Coaxial Oxy-fuel Turbulent Diffusion Flames,” Energy & Fuels, 27 (8), 4935-4935, 2013.
P. Toth, A.B. Palotas, E.G. Eddings, R.T. Whitaker and J.S. Lighty, “A novel framework for the quantitative analysis of high resolution transmission electronmicrographs of soot I. – improved measurement of interlayer spacing,” Combustion & Flame, 160, 909-919, 2013.
P. Toth, A.B. Palotas, E.G. Eddings, R.T. Whitaker and J.S. Lighty, “A novel framework for the quantitative analysis of high resolution transmission electronmicrographs of soot II. – robust multi-scale nanostructure quantification,” Combustion & Flame, 160, 920-932, 2013.
B-H Lee, E.G. Eddings and C-H Jeon, “Effect of Coal Blending Methods with Different Excess Oxygen on Unburned Carbon and NOx Emissions in an Entrained Flow Reactor,” Energy & Fuels, 26 (11) 6803-6814, 2012.
J. Zhang, K.E. Kelly, E.G. Eddings, and J.O.L. Wendt, “CO2 Effects on Near Field Aerodynamic Phenomena in 40kW, Co-Axial, Oxy-Coal, Turbulent Diffusion Flames,” International Journal of Greenhouse Gas Control, Vol. 5, S-1, S47-S57, 2011.
J. Ahn, Ryan Okerlund, A. Fry and E.G. Eddings, “Sulfur Trioxide Formation During Oxy-Coal Combustion,” International Journal of Greenhouse Gas Control, Vol. 5, S-1, S127-S135, 2011.
J. Zhang, K.E. Kelly, E.G. Eddings, J.O.L. Wendt, “Ignition in 40kW co-axial turbulent diffusion oxy-coal jet flames,” Proceedings of the Combustion Institute, 33, 3375-3382, 2011.
A. Sanchez, E.G. Eddings and F. Mondragon, “FTIR on line Monitoring of NO, N2O and CO2 during Oxygen-enriched Combustion of Carbonaceous Material,” Energy and Fuels, 24 (9), pp. 4849-4853, 2010.
Y. Okumura, J. Zhang, E.G. Eddings, J.O.L. Wendt, “Effect of O2/CO2 Ratio on Fuel-NOx Formation in Oxy-coal Combustion,” Journal of Environment and Engineering, Vol. 5, No. 2, 417-430, 2010.
A. Santamaria, N. Yang, E.G. Eddings and F. Mondragon, “Chemical and Morphological Characterization of the Soot Produced in an Inverse Diffusion Flame with Aromatic and Aliphatic fuels,” Combustion and Flame, 157, 33-42, 2010.
T.L. Henriksen, G.J. Nathan, Z.T. Alwahabi, N. Qamar, T.A. Ring and E.G. Eddings, “Planar measurements of soot volume fraction and OH in a JP-8 pool fire,” Combustion and Flame, 156, 1480-1492, 2009.
K. Szemmelveisz, I. Szőcs, Á.B. Palotás, L. Winkler and E.G. Eddings, “Examination of the Combustion Conditions of Herbaceous Biomass,” Fuel Processing Technology, 90, 839-847, 2009.
L. Huynh, H.R. Zhang, S. Zhang, E.G. Eddings, A.F. Sarofim, M. Law, P. Westmoreland and T. Truong, “Kinetics of Enol Formation from Reaction of OH with Propene,” Journal of Physical Chemistry A, 113(13), 3177-3185, 2009.
H.R. Zhang, E.G. Eddings, A.F. Sarofim and C.K. Westbrook, “Fuel Dependence of Benzene Pathways”, Proceedings of the Combustion Institute, 32(1), 377-385, 2009.
H.R. Zhang, E.G. Eddings, and A.F. Sarofim, “Pollutant Emissions from Gasoline Combustion: 1. Dependence on Fuel Structural Functionalities”, Environmental Science & Technology, 42 (15), 5615-5621, 2008.
K.J. Whitty, H.R. Zhang and E.G. Eddings, “Emissions from Syngas Combustion”, Combustion Science & Technology, 180 (6), 1117 – 1136, 2008.
H.R. Zhang, E.G. Eddings, and A.F. Sarofim, “A Journey from n-Heptane to Liquid Transportation Fuels. 1. The Role of the Allylic Radicals and Its Related Species in Aromatic Precursor Chemistry”, Energy and Fuels, 22, 945-953, 2008.
T.L. Henriksen, G.J. Nathan, T.A. Ring and E.G. Eddings, “Puffing Frequency and Soot Extinction Correlation in JP8 and Heptane Pool Fires,” Combustion Science & Technology, 180, (4), 699-712, 2008.
A. Santamaria, E.G. Eddings, and F. Mondragon, “Effect of ethanol on the chemical structure of the soot extractable material of an ethylene inverse diffusion flame,” Combustion and Flame, 151, 235-244, 2007.
H. Zhang, E.G. Eddings, A.F. Sarofim, and C.K Westbrook, “Mechanism Reduction and Generation Using Analysis of Major Fuel Consumption Pathways for n-Heptane in Premixed and Diffusion Flames,” Energy & Fuels, 21(4), 1967-1976, 2007.
H. Zhang, E.G. Eddings and A.F. Sarofim, “Olefin Chemistry in a Premixed n-Heptane Flame,” Energy & Fuels, 21, 677-685, 2007.
A. Santamaria, F. Mondragon, W. Quinones, E.G Eddings, A.F Sarofim, “Average structural analysis of the extractable material of young soot gathered in an ethylene inverse diffusion flame,” FUEL, 86, 1908-1917, 2007.
N.D. Marsh, I. Preciado, E.G. Eddings, A.F. Sarofim, A.B. Palotas and J.D. Roberston, “Evaluation of Organo-Metallic Fuel Additives for Soot Suppression,” Combustion Science & Technology, 179 (5), 987-1001, 2007.
H.R. Zhang, E.G. Eddings and A.F. Sarofim, “Criteria for Selection of Components for Surrogate of Natural Gas and Transportation Fuels,” Proceedings of the Combustion Institute, 31, 401-409, 2007.
H. Zhang, E.G. Eddings and A.F. Sarofim, “Combustion Reactions of Paraffin Components in Liquid Transportation Fuels Using Generic Rates,” Combustion Science & Technology, 179 (1-2), 61-89, 2007.
A. Santamaria, F. Mondragon, A. Mondragon, N.D. Marsh, E.G. Eddings, A.F. Sarofim, “FT-IR and 1H-NMR Characterization of the Products of an Ethylene Inverse Diffusion Flame,” Combustion & Flame, 146, 52–62, 2006.
W. Ciro, E.G. Eddings and A.F. Sarofim, “Experimental and Numerical Investigation of Transient Soot Buildup on a Cylindrical Container Immersed in a Jet Fuel Pool Fire,” Combustion Science & Technology, 178 (12), 2199–2218, 2006.
S. Yan, E.G. Eddings, A.B. Palotas, R.J. Pugmire and A.F. Sarofim, “Prediction of Sooting Tendency for Hydrocarbon Liquids in Diffusion Flames,” 19 (6) pp 2408 – 2415, Energy & Fuels, 2005.
S. Yan, Y.-J. Jiang, N.D. Marsh, E.G. Eddings, A.F. Sarofim, and R.J. Pugmire, “Study of the Evolution of Soot from Various Fuels,” 19 (5), 1804-1811, Energy & Fuels, 2005.
E.G. Eddings, S. Yan, W. Ciro and A.F. Sarofim, “Formulation of a Surrogate for the Simulation of Jet Fuel Pool Fires,” Combustion Science & Technology, Vol. 177 (4) pp. 715-739, 2005.
T.L. Henriksen, G. Nathan, Z. Alwahabi, J.P. Spinti, E.G. Eddings, P.J. Smith, “Soot Volume Fraction from Extinction in JP-8 and Heptane Pool Fires,” Proceedings of the Fourth Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, Adelaide, Australia, Dec.7-9, 2005.
A. Vikhansky, E. Bar-Ziv, B. Chudnovsky, A. Talanker, E.G. Eddings, M.J. Bockelie and A.F. Sarofim, “Measurements and Numerical Simulations for Optimization of the Combustion Process in a Utility Boiler,” International Journal of Energy Research, 28:391-401, 2004.
A. Molina, E.G. Eddings, D.W. Pershing and A.F. Sarofim, “Nitric Oxide Destruction during Coal and Char Combustion,” Combustion & Flame, Vol. 136, No. 3, pp. 303-312, 2004.
A.B. Palotas, A.F. Sarofim, C.J. Montgomery, E.G. Eddings, B. Dunn, “Effects of Fuel Additives on the Smoke Point of Fuels,” Material and Metallurgical Sciences, Publications of the University of Miskolc, Vol. 31, pp. 55-63 (2003).
A. Violi, S. Yan, E.G. Eddings, A.F. Sarofim, S. Granata, T. Faravelli, E. Ranzi, “Experimental Formulation and Kinetic Model for JP-8 Surrogate Mixtures,” Combustion Science & Technology, Vol. 174 (11-12) pp. 383-401, 2002.
A. Molina, E.G. Eddings, D.W. Pershing and A.F. Sarofim, “Reduction of Nitric Oxide on the Char Surface at Pulverized Coal Combustion Conditions,” Proceedings of the Combustion Institute, Vol. 29, pp. 2275-2281, 2002.
E.G. Eddings, A.F. Sarofim, C.M. Lee, K.A. Davis and J.R. Valentine, “Trends in Predicting and Controlling Emissions from Coal-Fired Boilers,” Fuel Processing Technology, Vol. 71, No. 1, pp.39-51, 2001.
E.G Eddings, W. Ciro and A.F. Sarofim, “Transient Heat Transfer in Exploding and Detonating Systems,” Khimicheskaya Fizika (Chemical Physics Reports), 20 (6), p.108-116, 2001.
A.F. Sarofim and E.G. Eddings, “Mineral Matter Transformation During Pulverized Coal Combustion,” Developments in Chemical Engineering & Mineral Processing, Vol. 9, pp. 313-327, 2001.
C. Lee, K.A. Davis, M.P. Heap, E.G. Eddings and A.F. Sarofim, “Modeling the Vaporization of Ash Constituents in a Coal-Fired Boiler,” Proceedings of the Combustion Institute, Vol. 28, pp. 2375-2382, 2000.
A. Molina, A.F. Sarofim, E.G. Eddings and D.W. Pershing, “Char Nitrogen Conversion: Implications to Emissions from Coal-Fired Utility Boilers,” Progress in Energy and Combustion Science, Vol. 26, pages 507-531, 2000.
W.B. Burton, J.S. Lighty, D.A. Inkley, E.G. Eddings, D.W. Overacker, K.A. Davis, C. Lee, A.F. Sarofim, “Emissions from Biomass Combustion in a Fluidized Bed Combustor and Gas Cleanup System,” Proceedings of the ASME 15th International Conference on Fluidized Bed Combustion, Savannah, GA, May 16-19,1999.
E.G. Eddings, J.S. Lighty and J. Kozinski, “Determination of Metal Behavior during the Incineration of a Contaminated Montmorillonite Clay” Environmental Science & Technology, 28, pp. 1791-1800, 1994.
E.G. Eddings and H.Y. Sohn, “Simplified Treatment of the Rates of Gas-Solid Reactions Involving Multicomponent Diffusion,” Industrial & Engineering Chemistry Research, 32, pp. 42-48 (1993).
E.G. Eddings and J.S. Lighty, “Evolution of Metal Contaminants from Incinerated Solids,” Proceedings of the ASME Joint Power Generation Conference, Atlanta, Georgia, Oct. 18-22, 1992.
E.G. Eddings and J.S. Lighty, “Fundamental Studies of Metal Behavior During Solids Incineration,” Combustion Science & Technology, 85, 1-6, p.375 (1992).
J.S. Lighty, E.G. Eddings, E.R. Lindgren, Deng Xiao-Xue, D.W. Pershing, R.M. Winter, and W.H. McClennen, “Rate Limiting Processes in the Rotary-Kiln Incineration of Contaminated Solids,” Combustion Science & Technology, 74, pp. 31-46 (1990).